Experimental strategy of the spectrophotometric approach using freeze-drying for PO43− determination in frozen and chilled chickens in the Saudi Arabia market

Herein, an efficient analytical method based on an extraction protocol was developed and validated for the spectrophotometric detection of phosphate (PO₄^3?) in chilled and frozen chicken samples. The preparation was a very simple sample that included freeze-drying, extraction with acidified amino acids and filtration of the final extract prior to spectrophotometric analysis. FT-IR spectrum of CS1 was confirmed that the selected solvent has successfully extracted PO₄^3? from the chilled chicken sample. Analytical performances were assessed in chilled of one of the merchant species and showed good recoveries with relative standard deviations (RSD) below 2%. The analytical validation parameters of the method in terms of limit of quantification (LOQ) and detection (LOD) were calculated and found to be 0.10 and 0.032 mg/L, respectively. This protocol has been effectively applied to PO₄^3? determination in chicken samples collected from Saudi supermarkets (Northern KSA), and PO₄^3? in all frozen samples was detected at high mg/kg levels ranging from 2.11 × 10⁴ to 2.90 × 10⁴ mg/kg, while in limit levels of PO₄^3? concentration were detected in the chilled samples except chilled sample 1 (CS1), which was 2.22 × 10⁴ mg/kg. The extraction and determination protocol suggested that this developed method could be validated for routine monitoring of PO₄^3? in food quality control laboratories and safety monitoring.     

Tuning the Composition and Structure of Ni@MoC Nanosheets for Highly Active and Stable Electrocatalysis in Water Splitting

The conventional electrolytic water-splitting process for hydrogen production is plagued by high energy consumption, low efficiency, and the requirement of expensive catalysts. Therefore, finding effective, affordable, and stable catalysts to drive this reaction is urgently needed. We report a nanosheet catalyst composed of carbon nanotubes encapsulated with MoC/Mo₂C, the Ni@MoC-700 nanosheet showcases low overpotentials of 275 mV for the oxygen evolution reaction and 173 mV for the hydrogen evolution reaction at a current density of 10 mA ⋅ cm⁻². Particularly noteworthy is its outstanding performance in a two-electrode system, where a cell potential of merely 1.64 V is sufficient to achieve the desired current density of 10 mA ⋅ cm⁻². Furthermore, the catalyst demonstrates exceptional durability, maintaining its activity over a continuous operation of 40 hours with only minimal attenuation in overpotential. These outstanding activity levels and long-term stability unequivocally highlight the promising potential of the Ni@MoC-700 catalyst for large-scale water-splitting applications.     

Facile synthesis of spherical covalent organic frameworks for enrichment and quantification of aryl organophosphate esters in mouse serum and tissues

Here, an imine-linked-based spherical covalent organic framework (COF) was prepared at room temperature. The as-synthesized spherical COF served as an adsorbent in dispersive solid-phase extraction (dSPE), by its virtue of great surface area (1542.68 m²/g), regular distribution of pore size (2.95 nm), and excellent stability. Therefore, a simple and high-efficiency dispersive solid phase extraction method based on a spherical COF coupled with high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) was established to determine aryl organophosphate esters in biological samples. This approach displayed favorable linearity in the range of 10.0–1000.0 ng/L (r > 0.9989), a high signal enhancement factor (58.8–181.8 folds) with low limits of detection (0.3–3.3 ng/L). Moreover, it could effectively eliminate complex matrix interference to accurately extract seven aryl organophosphate esters from mouse serum and tissue samples with spiked recoveries of 82.0%–117.4%. The as-synthesized spherical COF has been successfully applied in sample preparation. The dSPE-HPLC-MS/MS method based on a spherical COF has potential application to study the pollutants' metabolism in vivo.     

氟化铵快速分解－电感耦合等离子体质谱法测定地球化学样品中的稀土元素

测定地球化学样品中的微量稀土元素常用混酸分解法或碱熔融法,这些常规方法往往存在耗费试剂量多、基体效应大、操作周期长等缺点。本文采用氟化铵作熔剂,在旋盖聚四氟乙烯坩埚中220℃熔融样品,后采用2毫升硝酸和0.5毫升高氯酸、硫酸（1+1）在电热板上继续分解,建立了氟化铵分解 －电感耦合等离子体质谱法测定岩石、土壤和水系沉积物中15种微量稀土元素的分析方法。本方法能快速、有效地分解样品,经三种国家标准物质验证（岩石、土壤、水系沉积物）,方法的准确度ΔlgC在0.001～0.02之间,测定值与认定值相符。方法检出限为0.001～0.04μg／g之间,精密度RSD%在1.11％ ～4.85％之间,能够满足微量稀土元素的分析要求,方法具有简单快捷、消耗试剂少、检出限低、精密度与准确度好等特点,适合于地球化学等地质样品微量稀土元素的批量快速分析测定。     

Sample plug induced peak splitting in capillary electrophoresis studied using dual backscattered interferometry and fluorescence detection

The appearance of unexpected peaks in capillary electrophoresis (CE) is common and can lengthen the time of method development as assay conditions and experimental parameters are varied to understand and mitigate the effects of the additional peaks. Additional peaks can arise when a single-analyte zone is split into multiple zones. Understanding the underlying mechanism of these phenomena, recognizing conditions that favor its presence, and knowing how to confirm and eliminate the effect are important for efficient method optimization. In this study, we examine how the overlap of analyte zones with the sample plug can lead to peak splitting. This is explored experimentally using dual detection CE, which enables both the sample plug and analyte zones to be independently and simultaneously measured from the same detection volume. Simulations performed via COMSOL Multiphysics confirm the origin of the splitting and help guide experiments to reduce and eliminate the effect. Our findings show that this peak splitting mechanism can arise in separations of both small and large molecules but is, especially, prevalent in separations of slowly migrating macromolecules. This effect is also more prevalent when using a short length-to-detector, as is commonly found in microfluidic applications. A simple diffusion-less model is introduced to develop strategies for reducing peak splitting that avoids modifying the apparatus, such as by lengthening the separation length, which can be difficult. Decreasing the sample plug length and slowing the electroosmotic flow can both reduce this effect, which is confirmed experimentally.     

3D ordered macro-/mesoporous Ni_xCo_(100-x) alloys as high-performance bifunctional electrocatalysts for overall water splitting

Electrochemical water splitting is a facile and effective route to generate pure hydrogen and oxygen.However,the sluggish kinetics of hydrogen evolution reaction(HER) and especially oxygen evolution reaction(OER) hinder the water splitting efficiency.Meanwhile,the high-cost of noble-metal catalysts limit their actual application.It is thus highly urgent to exploit an economical and earthabundant bifunctional HER and OER electrocatalyst to simplify procedure and reduce cost.Herein,we synthesize the three-dimensionally ordered macro-/mesoporous(3 DOM/m) Ni_xCo_(100-x) alloys with distinctive structure and large surface area via a dual-templating technique.Among them,the3 DOM/m Ni_(61)Co_(39) shows the lowest overpotentials of 121 mV and 241 mV at 10 mA/cm~2 for HER and OER,respectively.Furthermore,when employed for water splitting,the Ni_(61)Co_(39) only requires 1.60 V to approach 10 mA/cm2 and presents excellent stability.These encouraging performances of the Ni_(61)Co_(39)render it a promising bifunctional catalyst for overall water splitting.     

Recent advances in bismuth vanadate-based photocatalysts for photoelectrochemical water splitting

Photoelectrochemical(PEC) technology is considered to be a promising approach for solar-driven hydrogen production with zero emissions. Bismuth vanadate(BiVO_4) is a kind of photocatalytic material with strong photoactivity in the visible light region and appropriate band gap for PEC water splitting.However, the solar-to-hydrogen efficiency(STH) of BiVO_4 is far away from the 10% target needed for practical application due to its poor charge separation ability. Therefore, this review attempts to summarize the strategies for improving the photocurrent density and especially hydrogen production of BiVO_4 materials through PEC techniques in the last three years, such as doping nonmetal and metal elements, depositing noble metals, constructing heterojunctions, coupling with carbon and metalorganic framework(MOF) materials to further enhance the PEC performance of BiVO_4 photoanode. This review aims to serve as a general guideline to fabricate highly efficient BiVO_4-based materials for PEC water splitting.     

Transition metal-based electrocatalysts for overall water splitting

Electrochemical overall water splitting is attracting a broad focus as a promising strategy for converting the electrical output of renewable resources into chemical fuels, specifically oxygen and hydrogen. However, the urgent challenge in water electrolysis is to search for low-cost, high-efficiency catalysts based on earth-abundant elements as an alternative to the high-cost but effective noble metal-based catalysts. The transition metal-based catalysts are more appealing than the noble metal catalysts because of its low cost, high performance and long stability. Some recent advances for the development in overall water splitting are reviewed in terms of transition metal-based oxides, carbides, phosphides, sulfides, and hybrids of their mixtures as hybrid bifunctional electrocatalysts. Concentrating on different catalytic mechanisms, recent advances in their structural design, controllable synthesis, mechanistic insight, and performance-enhancing strategies are proposed. The challenges and prospects for the future development of transition metal-based bifunctional electrocatalysts are also addressed.     

Capillary electrophoresis method for analysis of inorganic and organic anions related to habitability and the search for life

In situ missions of exploration require analytical methods that are capable of detecting a wide range of molecular targets in complex matrices without a priori assumptions of sample composition. Furthermore, these methods should minimize the number of reagents needed and any sample preparation steps. We have developed a method for the detection of metabolically relevant inorganic and organic anions that is suitable for implementation on in situ spaceflight missions. Using 55 mM acetic acid, 50 mM triethylamine, and 5% glycerol, more than 21 relevant anions are separated in less than 20 min. The method is robust to sample ionic strength, tolerating high concentrations of background salts (up to 900 mM NaCl and 300 mM MgSO₄). This is an important feature for future missions to ocean worlds. The method was validated using a culture of Escherichia coli and with high salinity natural samples collected from Mono Lake, California.     

PBFC-PI量子动力学方法及应用

对多原子体系的量子动力学计算非常重要, 然而, 对含六原子以上的分子体系进行精确量子动力学计算仍具挑战性. 面向过程的基函数定制(PBFC)-并行迭代(PI)方法是一种高效的量子动力学方法, 已应用于对含九原子的丙二醛异构体系的氢迁移速率的精确量子计算. 本综述首先阐明了PBFC的基本思想, 之后重点回顾了PBFC-PI方法的具体内容、 该方法与其它方法的结合及其应用方面的新进展. 应用这些方法实现了对单氢迁移、 协同双氢迁移和分步双氢迁移3种类型基准体系的大规模并行计算, 有助于获得对氢迁移过程的新认识.